ASI 0119 Hand Dryer Recess Kit - Division 10 Direct

Home > Hand Dryers > Parts / Accessories >

ASI 0119 Semi Recess Kit converts Turbo-Dri™ to ADA Compliance, White

List Price: $330.10

Our Price: $190.60

Savings: $139.50

Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days

Product Code: 0119

Qty:

Description

Technical Specs

ASI 0119 Semi Recess Kit converts Turbo-Dri™ to ADA Compliance, White

Mounting Box Options
Satin Stainless Steel Finish - see model 0119-93
Bright Polish Stainless Finish - see model 0119-92

Construction

Semi recessing mounting box reduces the projection of ASI's TurboDri™ dryer (0197) to less than 4" from wall for ADAAG and CalDaG Barrier Free Compliance. The cover is fabricated of 20 gauge cold rolled steel with white porcelain enamel to match dryer. The wall box is fabricated of 20 gauge type 304 stainless steel alloy 18-8 with matte finish. It has eight (8) 7/32" diameter mounting holes provided in sides on adjustable tabs (2 per vertical side) that eliminate the requirement for shim fitting for installation purposes. Three (3) 7/8" diameter holes are provided on the bottom wall and one on each bottom sidewall to facilitate power entry location.

Installation

RWO required is 10-3/4" W x 16-3/8" H x 3-3/4" D minimum

Install mounting box in wall recess using No. 10 fasteners appropriate for the wall conditions (supplied by installer) through concealed mounting holes provided. Electrical service is made by qualified electrician through knockouts provided with use of appropriate connector (supplied by installer) to meet codes having jurisdiction and left rough with a 14" pull.

For compliance with ADA Accessibility Guidelines bottom of Rough Wall Opening (RWO) should be located 44" maximum AFF or 36" maximum AFF for CalDAG compliance.

Note that top of RWO is 5/16" below top of unit. Dryer unit chassis (not supplied with this unit) is installed after recessing box installation is complete. Stub cable is brought from KO location to bottom dryer chassis location (see 0197 mounting template, provided with dryer), secured to strain relief and terminated to terminal block by qualified electrician. Dryer cover is installed using security screws (provided with dryer) after electrical hookup. Cover with vibration isolation gasket is mounted to box with four (4) security screws (supplied) for service accessibility to complete installation.