Home > Hand Dryers > Hand Dryers >

ASI 0165 Profile™ Compact Surface Mtd Automatic Hand Dryer, White Epoxy Finish
ASI 0165 Hand Dryer image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $553.10
Our Price: $304.20
Savings: $248.90
Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days



Product Code: 0165


Voltage*:
110-120V
208V
240V

Qty:  
Description Technical Specs A Note from the Manufacturer
 
ASI 0165 Profileā„¢ Surface Mounted Automatic Hand Dryer, White Epoxy Finish
Construction
Automatic hand dryer activates from an IR sensor when hands are placed in the activation zone. The cover is fabricated of one piece, heavy duty cast aluminum that has all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel. Air intake slots do not allow access to internal parts. the motor and heating element have internal resetting automatic thermal protection. Circuitry has self adjusting time out and fail safe off protection controlled by a microprocessor that detects and rejects false signals and automatically self calibrate to provide uniform sensitivity over its entire life span. The fixed directional air vanes are heavy duty, rust proof and tamper resistant. The back plate is furnished with vibration isolating mounting brushes.

Installation
Unit is surface mounted on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate. For masonry walls use expansion bolts or anchors for 1/4" screws. Electrical service is supplied and connected (by others) prior to installing cover. Cover is secured to back plate with two (2) hex socket security screws (supplied).

For compliance with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards install unit with bottom of sensor lens 48" max AFF (Above Finished Floor) if clear floor forward reach or if clear floor side reach access is provided or 46" [1168] max AFF if side reach access over an obstruction (e.g. vanity) with reach depth greater than 10" and less than 25" is only provided or 44" max AFF if forward reach over an obstruction (e.g. commode) with reach depth greater than 20" and less than 25" is only provided.

Operation
Dryer is activated by user placing hands under sensor. LED in sensor array shines blue light during operation to guide user to optimal hand placement for shorter drying time. Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Warranty
Unit shall be warranted against defects in materials or workmanship for ten (10) years per the manufacturer, American Specialties, Inc.

Share your knowledge of this product. Be the first to write a review »