Home > Grab Bars > Swing Up/Away >

ASI 3454P 30" Swing Away Grab Bar 1-1/4" (32mm) OD with Floor Plate - Peened
ASI 3454P Swing-Up Grab Bar image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $708.90
Our Price: $389.90
Savings: $319.00
Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days

Product Code: 3454P
Qty:

Description Technical Specs
 
ASI 3454P 30" Swing Away Grab Bar 1-1/4" (32mm) OD with Floor Plate - Peened
Construction
Swing Away Grab Bar with floor plate shall be fabricated of type 304 stainless steel alloy 18-8. Tubing is 1-1/4" diameter x 18 gauge. Vertical swing post shall be 1-1/2" square x 12 gauge and shall have solid 1/2" diameter pivot pins. Floor plate shall be 1/8" thick with five (5) holes provided to receive 1/4" FH screws and shall have self draining 90 degree position locking post socket. Wall bracket top pivot shall be 1/4" thick with four (4) holes provided to receive 1/4" FH screws. Grab bar weld joints to vertical swing post shall be internally reinforced with weld plugs let into post. All exposed surfaces shall be satin finish. All exposed edges and corners shall be radiused and burr free.

All Exposed Surfaces are Satin Finish Stainless Steel. Optional non-slip peened Surface denoted on part number with -P (peened).

Installation
Installer/construction contractor must provide concealed anchor plate or blocking for wall mounting top bracket as specified in construction documents or as required by local building codes prior to wall finishing. Note: concealed mounting plates or anchors and hardware are not supplied with this product. See manufacturer's technical specification for further installation detail.

ASI grab bars are designed to meet and exceed 2010 ADAAG Accessibility Standards such that fabricated product shall be of adequate strength to support a load of 250 lbs when properly installed. Mounting to the wall is a critical part of the system to meet this requirement. The fastener system must be adequately sized to withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Operation
Swing Away Grab Bar is manually pulled forward to a position perpendicular to wall for support and pushed against wall for storage during departure or arrival. Grab bar drops into position locking post socket at 90 degree index positions and must be manually lifted to swing bar to new position.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Accessories
ASI 3924 Grab Bar Anchor Kit - for Back to Back Mounting on 1/2" Thick Metal Partition ASI 3920 Grab Bar Mounting Kit - (3) #12 24 x 1-1/2" Machine Screws with Expansion Shields ASI 3900 Grab Bar Mounting Kit - (3) #12 2-1/23" Sheet-Metal Screws ASI 3925 Grab Bar Anchor Kit - for Back to Back Mounting on 3/4" Thick Metal Partition
Our Price: $7.35
Our Price: $5.85
Our Price: $3.81
Our Price: $12.24
ASI 3924 Grab Bar Anchor Kit image ASI 3920 Grab Bar Fasteners image ASI 3900 Grab Bar Fasteners image ASI 3925 Grab Bar Anchor Kit
ASI 3929-42" Grab Bar In Wall Anchor Kit - for Securing Exposed and Snap Mounting Grab Bar Flanges ASI 3929-36" Grab Bar In Wall Anchor Kit - for Securing Exposed and Snap Mounting Grab Bar Flanges
Our Price: $24.49
Our Price: $20.41
ASI 3929-42 Grab Bar In Wall Anchor Kit ASI 3929-36 Grab Bar Anchor Kit

Share your knowledge of this product. Be the first to write a review »