Construction
Surface mounted liquid soap dispenser is fabricated of translucent, shatter resistant polyethylene soap container, a bright polished chrome plated ABS bracket and collar, and a grey ABS dispensing valve with stainless steel spring. Capacity: 24 oz.
Installation Mount dispenser on wall with four sheet metal screws, furnished by manufacturer, at points indicated by an S. For plaster or
dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet metal screws
furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet metal screws furnished, or
provide 1/8" (3mm) toggle bolts or expansion bolts.
Note: Provide 1-1/4" (30mm) minimum clearance from cap to underside of any horizontal projection. Valve should be located 44"
(1120mm) maximum above the finish floor.
Operation A measured amount of soap is manually dispensed by pushing up against valve. Valve operation complies with ADA Accessibility Guidelines by requiring no more than 5 lbs. pressure to actuate and requires no grasping or twisting by operator. Unit can be reloaded by unscrewing collar from base, inverting unit, and unscrewing soap valve. Soap level is continuously visible.
Warranty One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
|