|
|
|
|
|
|
|
For Double Roll Option see Model 7686
Construction Single roll toilet paper roll holder flanges and support arms are fabricated of 18-8, type 304, 22-gauge stainless steel. The wall plates are fabricated of 18-8, type 304, 19-gauge stainless steel. The unit accommodates one standard core toilet paper roll up to 5-1/2" diameter. The spindle is chrome plated plastic with a heavy duty internal spring. All exposed surfaces have bright polished stainless steel finish.
Installation Surface mount unit on wall using No 10 self tapping screws (by others) through holes provided in mounting plates into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit wall conditions. Hang post and flange assemblies on mounting plates and tighten setscrews to lock units to plates.
For compliance with ICC/ANSI A-117.1-2003 and ADA Accessibility Guidelines, install unit with centerline of roller at 19" minimum above finished floor to 44" maximum AFF and centerline of dispenser no farther than 33" from back wall behind commode or between 7" and 9" from front of commode. Recommended mounting height for general utility is 30" AFF to centerline of roll and 12" from front of commode to centerline of dispenser.
Operation Spring loaded spindles revolve freely and hold rolls until core is removed.
Warranty One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale. Gamco warrants to commercial purchasers only.
Options Model B-6857 is the same except with satin finish.
|
|
|
|
|
|
|