Home > Towels/Waste Accessories > Towel/Waste Combination Units >

ASI 04692AC-9 Surface Mount Automatic Roll Towel Dispenser/Waste Receptacle
04692AC-9 ASI Combination Automatic Roll Paper Towel Dispenser and Waste Receptacle image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $1,934.40
Our Price: $1,063.90
Savings: $870.50
Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days


Product Code: 04692AC-9
Qty:

Description Technical Specs
 
ASI 04692AC-9 Surface Mount Automatic Roll Towel Dispenser/Waste Receptacle
Construction
Surface mounted automatic roll paper towel dispenser and waste receptacle fabricated of 22 gauge stainless steel with exposed surfaces in satin finish. . Automatic dispensing mechanism is supplied and powered by C-UL-US and CE approved internal low voltage adapter (supplied) using 110-240VAC, 50/60 Hz. Dispenser activates when hands are placed in sensor zone. Face trim is one piece construction, 1" wide with a 1/4" square return to collar. Door is hinged to cabinet with a full length 3/16" dia. stainless steel multi staked piano hinge and locks to cabinet with tumbler lock keyed like other ASI washroom equipment. Waste container has hemmed edges for safety and is retained by tumbler lock keyed like other ASI washroom equipment. 9" stainless steel collar included.
Towel Capacity: 8" Standard Core Roll
Waste Capacity: 17 Gallons

Installation
Surface mount to wall with No. 10 self threading pan head or flat head screws (not included) through concealed mounting holes provided. Power is supplied by code approved cable or conduit (by others) to rear power entry knock out as indicated on diagram and terminated in utility duplex outlet box (provided) inside cabinet. Power required is 110-240 VAC protected by 15A circuit breaker (by others) for low voltage adapter that draws 1/3 amp. Power adapter for dispenser unit is supplied, cabled, and plugged into dispenser and is plugged into duplex outlet (by others). Stainless steel collar is installed on cabinet prior to mounting on wall following instruction sheet provided with unit.

For compliance with ANSI A-117.1, 2015 ABA Standards and 2010 ADA Accessibility Standards, install unit so that top edge of towel dispenser opening is 48" maximum above finished floor (MAX AFF) only if clear floor reach access is provided. Be advised that local codes may require mounting so that top of towel dispenser opening is 40" MAX AFF (e.g. California UBC/Title 24).

For general utility install unit with top of towel dispenser opening between 49" and 56" (1245 to 1422) AFF.

Operation
Towels are dispensed automatically when hands are placed in sensor zone. Owner predetermines length of towel by making selections on three position switches for length, delay, and economy. Unit may be reloaded with a full roll to automatically start when finished with an existing partial roll and will continue to feed properly when reloaded with a full roll and partial roll is transferred to stub roll position. Refill dispenser by unlocking door and replacing towel roll for an empty or partially empty unit. Waste container is emptied manually by unlocking the door. Locking compartment and receptacle container prevents unauthorized access or removal.

Options
Model 04692AC-6 Semi Recessed Automatic Roll Paper Towel and Waste Receptacle Combination Unit
Model 04692AC Recessed Automatic Roll Paper Towel and Waste Receptacle Combination Unit

Accessories
ASI 04692AC Recessed Automatic Roll Paper Towel Dispenser and Waste Receptacle ASI 04692AC-6 Semi Recessed Automatic Roll Towel Dispenser/Waste Receptacle
Our Price: $815.30
Our Price: $932.70
04692AC ASI Combination Automatic Roll Paper Towel Dispenser and Waste Receptacle image 04692AC-6 ASI Combination Automatic Roll Paper Towel Dispenser and Waste Receptacle image

Share your knowledge of this product. Be the first to write a review »