Home > Mirrors > Angle Frame >

ASI 0605-1824, 18" W x 24" H Inter-Lok Angle/Welded Framed Mirror with 5"D Shelf
ASI 0605 18 x 24 Mirror image
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $203.30
Our Price: $111.80
Savings: $91.50
Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days

Product Code: 0605-1824

Description Technical Specs A Note from the Manufacturer
ASI 0605-1824, 18" W x 24" H Inter-Lok Angle/Welded Framed Mirror with 5"D Shelf
Mirror frame and shelf are fabricated of 18-8 stainless steel, type 304, 18 gauge with mitered corners welded and polished. Back of mirror is protected by 1/8" (3.2mm) thick expanded polyethylene microcell foam sheet material that is abrasion resistant, shock absorbing, and water resistant. An 18 gauge corrosion protected steel H bracket supplied.

Mirror standard glazing is No. 1 quality, 1/4" (6.4mm) thick plate/float, silver coated and hermetically sealed with a uniform coating of electrolytic copper plating. It is warranted against silver spoilage for 15 years.

The exposed frame and shelf surfaces have a No. 4 satin finish.

Meets Federal Spec DD-M-411C, ASTM C-1503, and ASTM C-1036-91

Install "H" wall brackets level and plumb per diagram location using No. 10 self tapping screws supplied by others. Hang mirror on bracket and tighten locking screws at top and bottom.

For compliance with ADA Accessibility Guidelines install unit with bottom edge of reflecting surface no higher than 40" (1016mm) maximum above finished floor. Note: Consult local and national accessibility codes for proper installation guides. Code compliance is the responsibility of the installer.

One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale.

Additional Glazing Options
Glazing types indicated below are particularly suited to applications where frequent breakage and/or security problems exist or are a concern. While more durable, the reflective quality of some of these types of mirrors are not as true as standard plate glass. Call 920-569-0895 x2 or email quotes@div10direct.com for pricing on these special order options and/or custom sizes. Specify if security mirror is needed.
-B Polished tempered glass, 1/4"; Image Quality: Good
-C Type 304 Stainless Steel polished to #8 mirror finish; Image Quality: Good
-D Highly Impact Resistant and Highly Shock Resistant Polycarbonate sheet, 1/4"; Image Quality: Very Good
-E Highly Impact Resistant Plexiglas, acrylic plastic, 1/4"; Image Quality: Very Good
-L Laminated glass, 1/4"; Image Quality: Excellent

Share your knowledge of this product. Be the first to write a review »