Home > Mirrors > Channel Frame >

Bobrick B-166 1836, 18" x 36" Channel Framed Mirror with 4"D Shelf
Bobrick B-166 18 x 36 Mirror image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $273.30
Our Price: $157.15
Savings: $116.15
Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days


Product Code: B-1661836
Qty:

Description Technical Specs A Note from the Manufacturer
 
Bobrick B-166 1836, 18" W x 36" H (44 x 91cm) Chanel-Framed Mirror with 4"D Shelf, 1/4" Glass, and Theft Resistant Mounting
Construction
Channel Frame Mirror with shelf frame is fabricated of type 430 stainless steel, one piece frame with 90 degree mitered corners. Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the wall. Locking devices secure mirror to concealed wall hanger.

The exposed frame surfaces have a bright polish finish.

Mirror standard glazing is No. 1 quality, 1/4" (6.4mm) thick float glass, selected for silvering, electrolytically copper-plated by the galvanic process. It is warranted against silver spoilage for 15 years. The back is protected by full size, shock absorbing, water resistant, nonabrasive, polyethylene padding.

Shelf is fabricated of 18-8, type 304, 18 gauge stainless steel with satin finish. When properly installed, mirror shelf meets accessible design by protruding 4"(102mm) from wall.

Installation
Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts. Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed flat against the wall approximately 1" (25mm) above final position and then lowered into final position.

Place shelf below mirror and install with wall screws (not furnished) at points indicated by S.

Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.

"2S" Tab Design — Double-sided tape secures mirror to concealed wall hanger when it is lowered into final position.

Warranty
Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale.

Share your knowledge of this product. Be the first to write a review »