Search
Start Saving
Toilet Partitions
Washroom Accessories
Lockers

  Home > Hospitality Accessories > Soap Dishes >

ASI 0398 Recessed Soap Dish with Bar, Stainless Steel (Dry Wall Mount)
ASI 0398 Recessed Soap Dish with Bar
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $53.50
Our Price: $29.40
Savings: $24.10
Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days



Product Code: 0398
Qty:

Description Technical Specs
 
ASI 0398 Recessed Soap Dish with Bar, Stainless Steel, Dry Wall Mount
Construction
Heavy Duty Stainless Steel Soap Dish with Rectangular Solid Bar for dry wall mounting shall be formed of 20 gauge alloy 18-8 seamless deep drawn stainless steel, type 304. Exterior shall have polished bright finish. Retaining lip with rounded corners shall be welded to body and shall project 5/8" from bezel. Optional mounting clamp (Model № 40, available separately) shall be fabricated of 18 gauge corrosion protected steel with mounting holes for № 8-32-UNC-2A machine screws (by others). Bar shall be stainless steel with cross section of 3/16" thick x 1" high with 3/4" radius bends and shall be welded to bezel. Water runoff path shall be provided as pattern of raised dimples on soap shelf and shall prevent soap from slipping.

Installation

Rough Wall Opening (RWO): 6-1/8" W x 4-1/8" H x 4" D

For Standard Recessed Mounting: Use two (2) № 8 stainless steel Philips flat or oval head self tapping or wood screws (by others) of suitable length to penetrate blocking in back of rough wall opening (RWO) by approximately 1/2". Apply a continuous bead of silicone sealant (by others) behind flange and into screw holes. Tighten screws to hold flange tight against finished wall face. Wipe off excess sealant immediately.

Optional Method for Recessed Mounting: Order separate item Model № 40 dry wall clamp. Apply a continuous bead of silicone sealant (by others) behind flange and into screw holes. Loosely attach clamp to the back of the unit with two (2) stainless steel Philips flat or oval head № 8-32- UNC-2A machine screws (provided by others to suit wall conditions). Insert into RWO and adjust clamp so that it grips inside wall surface through opening. Secure accessory to clamp and wall by tightening screws. Wipe off excess sealant immediately.

Share your knowledge of this product. Be the first to write a review »