Search
Start Saving
Toilet Partitions
Washroom Accessories
Lockers

  Home > Toilet Tissue Dispensers > Single Roll >

ASI 0402-Z Recessed Toilet Tissue Dispenser, Bright Polish Finish
ASI 0402-Z Recessed Toilet Paper Holder image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $36.90
Our Price: $20.30
Savings: $16.60
Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days



Product Code: 0402-Z


Recessed Mounting Type*: 		Wet Wall - need perforated lugs
Dry Wall - Unit will have dimpled holes

Qty:  
Description Technical Specs
 
ASI 0402-Z Recessed Toilet Tissue Dispenser, Bright Polish Finish
Construction
Recessed Toilet Paper Holder shall hold and dispense all standard core roll tissue up to 5" diameter roll and shall be die-cast of zamac in seamless one piece construction. Back shall have two (2) perforated lugs for wet wall anchoring and two (2) dimpled holes for dry wall installation. Dry wall clamp will be supplied for dry wall installation. A plastic, spring-loaded, removable roller held between two (2) solid bars shall hold paper roll. All exposed surfaces shall be triple plated with copper, nickel and chrome to a mirror finish.

Installation
Rough Wall Opening (RWO) required is 5-1/4" W x 5-1/4" H x 2" D

For Wet wall Recessed Mounting: Apply grout into rough wall opening. Apply grout to back of unit and on perforated lugs and push unit into opening to seat flange flush with wall face. Allow unit to set and grout to cure before use.

For Standard Dry Wall Recessed Mounting: Use two (2) No. 10 stainless steel Philips flat or oval head self tapping or wood screws (by others) of suitable length to penetrate blocking in back of RWO by approximately 1/2". Apply a continuous bead of silicone sealant (by others) behind flange. Tighten screws to hold flange tight against finished wall face. Wipe off excess sealant immediately.

Optional Method for Dry Wall Recessed Mounting: Order separate item Model No 40 dry wall clamp. Loosely attach clamp to the back of the unit with two (2) stainless steel Philips flat or oval head No. 10B, 10AB, or 10BP self tapping screws (provided by others to suit wall conditions) through dimpled holes at back of shell. Apply a continuous bead of silicone sealant (by others) behind flange. Insert into RWO and adjust clamp so that it grips inside wall surface through opening. Secure accessory to clamp and wall by tightening screws. Wipe off excess sealant immediately.

For compliance with ADA Accessibility Guidelines install unit with centerline of roller 19" min AFF to 42" max AFF and 7" min to 9" max from front of commode to centerline of dispenser.

Operation
Spring loaded spindle revolves freely and holds roll until core is removed.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Share your knowledge of this product. Be the first to write a review »