Search
Start Saving
Toilet Partitions
Washroom Accessories
Lockers

  Home > Toilet Tissue Dispensers > Multiple Roll >

ASI 0484-HC Partition Mounted Seat Cover and Toilet Tissue Dispenser, Satin Finish
ASI 0484-HC Toilet Paper Holder image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $571.70
Our Price: $314.40
Savings: $257.30
Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days



Product Code: 0484-HC
Qty:

Description Technical Specs
 
ASI 0484 Partition Mounted ADA Compliant Dual Access Seat Cover and Toilet Tissue Dispenser, Satin Finish
One side mounts flush on barrier free compartment side to allow grab bar clearance

Construction
Partition mounted dual access seat cover and toilet paper dispenser is fabricated of 18 gauge type 304 stainless steel alloy 18-8. The face trim mounting flanges are 22 gauge of one piece construction 1" wide with no welded miters and has square 1/4" returns to face of partition. The flange on the barrier free side is flush with face of unit to permit flush mounting behind grab bar (not included). All exposed surfaces are satin finish. The door is connected to cabinet with a full length piano hinge and held closed with two tumbler locks keyed like other ASI washroom equipment. Theft resistant and vandal resistant rollers are molded of high impact resistant plastic with integral molded in stainless steel end pins. Four (4) R-004 rollers are included.

Installation
Partition Cut Out required: 15-1/2" W x 28-7/8" H x 1/2" to 3-3/4"" thick partition (394 x 733 x 13 to 95)

Mount unit in partition using No. 10 x 3/4" self tapping screws (supplied) through mounting holes provided. Holes in flanges are offset to prevent screw interference. Note: partition cutout is 7/8" below top of face trim.

For compliance with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Guidelines top of cutout should be between 43- 3/4" and 50-7/8" Above Finished Floor (AFF). One trim-mounting flange adjusts for partition thickness of 1/2" to 3-3/4". To comply with CalDAG mounting height, top of cutout should be 42-7/8" AFF maximum. If optional grab bar is used (not supplied) it is positioned across unit with top of grip surface at 33" (838) AFF minimum.

Operation
Toilet paper rolls and paper seat covers are serviced by unlocking and opening the door. Seat covers are self feeding until supply is depleted. Seat cover dispenser holds and dispenses 1000 paper seat covers. Toilet tissue dispenser holds and dispenses four (4) standard or four (4) 4-1/2" x 5-1/4" diameter tissue rolls (two per side). The spindles are vandal resistant and only accessible when door is opened. Barrier baffle panels preserve privacy between stalls at all times.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Share your knowledge of this product. Be the first to write a review »