Home > Grab Bars > Straight, 1-1/4" OD >

Bobrick B-5892 Straight Grab Bar 1-1/4" (32mm) OD with White Foam Padded Backrest
Bobrick B-5892 Stainless Steel Grab Bar with Backrest image
 
Alternative Views:


Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $233.40
Our Price: $134.21
Savings: $99.19
Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days



Product Code: B-5892
Qty:

Description Technical Specs
 
Bobrick B-5892 Straight Snap Flange Grab Bar 1-1/4" (32mm) OD with White Polyurethane Integral Foam Padded Backrest - Satin Finish 304 SS
Construction
Grab Bar is type-304,18-8, 18 gauge stainless steel tubing. Tubing is 1-1/4" outside diameter. Ends are heliarc welded to concealed mounting flanges. Concealed mounting flanges are 18-8, type 304, 11 gauge thick stainless steel plate that are 2" x 3-1/8" with six holes for attachment to wall. The snap flange covers snap over the mounting flange to conceal mounting screws. They are 18-8, type 304, 22 gauge stainless steel with satin finish, 3-1/4" x 5/8" deep. The backrest is 14-1/4" x 6-3/8" x 1-5/8" constructed of white colored polyurethane integral foam. The grab bar backrest is secured to the grab bar with 18-8, Type 304, 18 gauge stainless steel C-clamps.

All exposed grab bar surfaces are Satin Finish Stainless Steel.

*Grab bars are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended.

Installation

Provide concealed anchor device or backing as specified or required in accordance with local building codes before wall is finished. Fasten concealed mounting flanges to anchor device or backing with at least two screws opposing each other in each flange. Snap flange covers over each mounting flange to conceal mounting screws. Concealed anchor devices and mounting screws are not included. For Mounting Kit options, see Accessories listed below.

Clearance between the grab bar and wall is 8-1/4".

Additional Options
Custom Grab Bar configurations and sizes are available.

Call us at 920-569-0895 ext. 2 or email [email protected] for pricing and lead times.

Accessories
Bobrick 252-30 Grab Bar Mounting Kit - (3) #14 x 2-1/2" Sheet-Metal Screws Bobrick 251-4 WingIt™ Grab Bar Fastener Bobrick 2583 Grab Bar Mounting Anchor Kit - 3/4" to 1" Thick Bobrick 2586 Grab Bar Mounting Anchor Kit - 1/2" Thick
Our Price: $3.62
Our Price: $61.24
Our Price: $15.87
Our Price: $24.32
Bobrick B-252-30 Grab Bar Fasteners image Bobrick B-251-4 Grab Bar Fasteners image Bobrick B-2583 Grab Bar Fasteners image Bobrick B-2586 Grab Bar Fasteners image

Share your knowledge of this product. Be the first to write a review »