Home > Shower Accessories > Shower Seats >

Bobrick B-918116L Folding Bariatric Shower Seat with Legs, Phenolic, ADA Compliant
Bobrick B-918116L Folding Bariatric Shower Seat
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $2,321.10
Our Price: $1,334.63
Savings: $986.47
Manufacturer: Bobrick
Country of Origin: Taiwan
Availability: Usually Ships within 2-3 Business Days



Product Code: B-918116L
Qty:

Description Technical Specs
 
Bobrick B-918116L Folding Bariatric Shower Seat with Legs, Phenolic, ADA Compliant
Construction
Bariatric folding shower seat shall have a frame and three front swing-down legs constructed of zinc-plated 3/4" steel pipe 1/10" wall thickness, 1/8" white vinyl antibacterial, biocompatible, coating thickness, 1-5/16" outside diameter. Seat shall be one-piece, 3/8" thick, high-pressure laminate with matte-finish, white-colored surfaces and black phenolic-resin core--cannot delaminate. Shower seat shall be equipped with three mounting flanges constructed of stainless steel Inox AISI 304 1/8" thick wall plates with polyamide 6 flange cover. Stainless steel Inox AISI 304, 11-gauge hinge brackets align between seat and legs. Shower seat shall comply with accessible design guidelines (including ADAAG in the U.S.A.).

Installation
Unfasten hinge arm brackets from shower seat legs, if they are not already loose. Release white plastic flange covers from all three mounting flange assemblies with a flat-blade screwdriver and pull them back to expose flanges. Remove large pivot bolt and nut from all three flange assemblies to remove them from the shower seat pivot assemblies.

Provide concealed anchor device(s) or backing as specified or required in accordance with local building codes before wall is finished. Once desired mounting location and height is determined, position temporary mounting template against the wall, with template arrow facing forward and pointing up, and mark a level line on the wall. Remove adhesive strip covers (3) from rear of mounting template. Secure temporary template to wall with the adhesive strips, in it's original orientation, using the level line as a guide to align it. Drill a small pilot hole at all twelve mounting bolt locations. Remove template from wall. Four mounting bolt locations, per mounting flange, to be drilled to accept twelve 3" long 5/16" hex-head lag bolts (furnished).

Securely mount all three mounting flange assemblies to wall and concealed anchor device or backing (not furnished) with hex-head lag bolts. Left flange assembly to be oriented with hinge arm bracket at lower right position. Right flange assembly to be oriented with hinge arm bracket at lower left position.

With white plastic flange covers pulled back, position shower seat with pivot assemblies near mounting flanges. Align the pivot assemblies with the lateral pivot holes of the flange assemblies. Thread the pivot bolts back through the flanges and pivot assemblies in their original orientation. Secure the assemblies together threading the nuts onto the pivot bolts. Tighten the pivot bolts and nuts to 5.6/6.7 pounds of force. The shower seat should move up and down with a small amount of user effort, but should not move independently.

Refasten hinge arm bracket ends to vertical shower seat legs. Snap white plastic flange covers into place over mounting flanges. Adjust feet of vertical shower seat legs by rotating the feet clockwise or counter-clockwise until all three feet contact the floor securely.

Optional anchor devices and/or fasteners (not provided) may be used, subject to type of wall on which the shower seat will be mounted, but would also be subject to local building codes for safe shower seat mounting.

Safety Warning
Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 1102lbs when properly installed and used. To avoid potential seat malfunction, DO NOT use seat if weight exceeds 1102lbs.

Operation
Bariatric shower seat folds up against the wall when not in use. The baseplate holds seat into this upright position until released by pulling the top of seat away from wall. The seat should move up and down with a small amount of user effort, and should not move independently. When the seat is lowered to a horizontal sitting position, the seat should automatically level with the help of the stainless steel hinge bracket, which aligns the swing-down legs. Nonporous high-pressure laminate seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria. Bobrick bariatric shower seats, when properly installed, have sufficient strength to support 1102lbs, complying with accessible design guidelines (including ADAAG in the U.S.A.).

Share your knowledge of this product. Be the first to write a review »