GENERAL NOTES FOR MIRRORS:

• Glass surfaces should be cleaned with any suitable non-abrasive standard glass

cleaner, such as Windex® or Glass Plus®. Do NOT use cleaner with ammonia or

bleach. Plastic surface mirrors {D & E glazing only} can be washed with mild soap and

damp cloth with light pressure to remove splash & spatter, taking care to avoid mirror

edges. To remove grease, oil or tar deposits on the mirror surface either kerosene or

hexane may be used. Do not use kitchen cleaning sprays or window cleaners or any

scouring compounds, or any other unlisted chemical product cleaners.

• For protection each D and E glazing mirror has a durable paint backing and a

removable masking on the front. This masking should remain in place to protect the

mirrors during all phases of installation. Plastic mirrors should be handled with the

masking left on. Care should be taken to avoid sliding the mirrors against each other.

• After installation if there is trouble removing the masking, aliphatic naptha, kerosene

or distilled alcohol may be used to moisten and soften the adhesive. Do not use any

other unlisted chemical product cleaners or sharp objects to remove the masking.

• For long term maintenance of surface gloss the plastic mirror may be occasionally

polished using a clean flannel cloth and good plastic cleanser and/or polish, e.g.

Johnson’s Pledge®. Follow the polishing instructions on the container label.

• To repair vandalism fine scratches use a plastic scratch remover or compound cleaner

and apply by hand polishing. Remove all residue and polish as above step No. 3. Deep

scratches can be smoothed out by lightly sanding with 400 grit wet paper, and then

following the fine scratch step and polishing step as above.