Home > Mirrors > Fixed / Adjustable Tilt >

ASI 0535-1630, 16" W x 30" H ADA Compliant Fixed Angle Tilt Mirror, Satin Finish
ASI 0535 16 x 30 Tilted Mirror image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $268.10
Our Price: $147.50
Savings: $120.60
Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days


Product Code: 0535-1630
Qty:

Description Technical Specs A Note from the Manufacturer
 
ASI 0535-1630, 16" W x 30" H ADA Compliant Fixed Angle Tilt Mirror Extends 4" at Top, Satin Finish

Construction
Fabricated of 18-8 stainless steel, type 304, 20 gauge with mitered corners. All exposed surfaces have No. 4 satin finish and will be protected during shipment by plastic PVC film easily removable after installation. Mounting holes are keyhole slots on the back.

Mirror standard glazing is No. 1 quality, 1/4" (6.4mm) thick plate/float, silver coated and hermetically sealed with a uniform copper plating. It is warranted against silver spoilage for 15 years.

The exposed frame surfaces have a No. 4 satin finish.

Installation
Fixed Tilt Mirror is surface mounted on wall or partition using four (4) No. 10 self tapping screws supplied by others. Mounting holes through back are keyhole slots for hanging unit on pre-installed screws. Unit requires 5/8" (16mm) clearance at top to engage screws in keyhole slots.


For compliance with 2010 ADA Accessibility Standards install unit with bottom edge of reflecting surface no higher than 40" (1016mm) maximum above finished floor. Note: Consult local and national accessibility codes for proper installation guides. Code compliance is the responsibility of the installer.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale.


Additional Glazing Options
Glazing types indicated below are particularly suited to applications where frequent breakage and/or security problems exist or are a concern. While more durable, the reflective quality of some of these types of mirrors are not as true as standard plate glass. Call 920-569-0895 x2 or email [email protected] for pricing on these special order options and/or custom sizes. Specify if security mirror is needed.
-B Polished tempered glass, 1/4"; Image Quality: Good
-C Type 304 Stainless Steel polished to #8 mirror finish; Image Quality: Good
-D Highly Impact Resistant and Highly Shock Resistant Polycarbonate sheet, 1/4"; Image Quality: Very Good
-E Highly Impact Resistant Plexiglas, acrylic plastic, 1/4"; Image Quality: Very Good
-L Laminated glass, 1/4"; Image Quality: Excellent

Share your knowledge of this product. Be the first to write a review »