Home > Mirrors > Angle Frame >

Gamco A-2448, 24" x 48" Satin Finish Angle/Welded Framed Mirror
Gamco A-24 x 48 Mirror image
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
Our Price: $138.11
Manufacturer: Gamco
Country of Origin: USA
Availability: Usually Ships in 3 Weeks

Product Code: A-24X48

Description Technical Specs A Note from the Manufacturer
Gamco A-2448, 24" W x 48" H (61 x 122cm) Satin Finish Angle/Welded Framed Mirror with 1/4" Glass and Theft Resistant Mtg
Fabricated of 18-8, type 304, heavy gauge stainless steel, 3/4" x 3/4" (19 x 19mm) angle satin finish. One piece, roll formed construction forms continuous stiffener on all sides. Bevel design on front of angle holds frame tightly against mirror. Corners of mirror frame are heliarc welded, ground, and polished smooth. Galvanized steel back is fastened to frame with concealed screws and equipped with integral horizontal hanging brackets near the top and bottom.

Mirror standard glazing is No. 1 quality, 1/4" (6.4mm) thick float glass, selected for silvering, electrolytically copper-plated by the galvanic process. It is warranted against silver spoilage for 15 years. The back is protected by full size, shock absorbing, water resistant, nonabrasive, polyethylene padding.

The exposed frame surfaces have a satin finish.

Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts. Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed flat against the wall approximately 1" (25mm) above final position and then lowered into final position.

Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.

Lock Tab Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final position. Locking device may be unlocked by sliding a flat-blade screwdriver or Key between mirror and wall at center of mirror and depressing tab on back panel.

For compliance with ADA Accessibility Guidelines install unit with bottom edge of reflecting surface no higher than 40" (1016mm) maximum above finished floor. Note: Consult local and national accessibility codes for proper installation guides. Code compliance is the responsibility of the installer.

Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale. Gamco warrants to commercial purchasers only.

Share your knowledge of this product. Be the first to write a review »