Capacity: 1.3 gallons
Surface mounted sanitary napkin disposal is fabricated of durable, high impact, grey ABS with high gloss finish on exposed surfaces. Lid is secured to container with keyed pivots.
For permanent installation, use upper round mounting holes. Mount unit with two sheet metal screws, furnished by manufacturer, at
points indicated by an S.
For installation where the entire unit may be removed from wall for emptying and cleaning, use lower keyhole slot mounting holes.
Using the container as a template, mark the location of the keyhole slots indicated by an S. Mount plastic bushings with screws
furnished by manufacturer. Container then snaps over bushings to hold unit in place.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet metal
screws furnished by manufacturer.
For masonry walls, provide fiber plugs or expansion shields for use with sheet metal screws furnished by manufacturer, or provide
3/16" (4.8mm) toggle bolts or expansion bolts.
For partitions with particle board or other solid core, secure with two sheet metal screws (not furnished), or provide through bolts,
nuts, and washers.
For hollow core metal partitions, provide solid backing into which sheet metal screws (not furnished) can be secured. If two units are
installed back to back, then provide threaded sleeves and machine screws for the full thickness of partition.
Lid flips up for disposal and servicing of container.
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.