To take full advantage of this site, please enable your browser's JavaScript feature.
Learn how
Search
Categories
Toilet Partitions
Metal Partitions
Metal Privacy Screens
Metal Pilasters, Panels, and Doors
Metal In Corner Compartments
Metal Between Wall Compartments
Laminate Partitions
Laminate Privacy Screens
Laminate Pilasters, Panels, and Doors
Laminate In Corner Compartments
Laminate Between Wall Compartments
Solid Plastic Partitions
Solid Plastic Privacy Screens
Solid Plastic Pilaster, Panels, and Doors
Solid Plastic In Corner Compartments
Solid Plastic Between Wall Compartments
Stainless Steel Partitions
Stainless Steel Privacy Screens
Stainless Steel Pilasters, Panels, and Doors
Stainless Steel In Corner Compartments
Stainless Steel Between Wall Compartments
Phenolic Partitions
Phenolic Privacy Screens
Phenolic Pilasters, Panels, and Doors
Phenolic In Corner Compartments
Phenolic Between Wall Compartments
Washroom Accessories
Childcare Products
Baby Changing Stations
Parts / Accessories
Seating
Custodial Accessories
Grab Bars
Straight, 1-1/4" OD
Straight, 1-1/2" OD
Single Wall Configs
Two Wall Configurations
Wall to Floor
Swing Up/Away
Shower / Tub
Bariatric
Grab Bar Accessories
Hand Dryers
Hand Dryers
Parts / Accessories
Healthcare Accessories
Hooks
Hospitality Accessories
Soap Dishes
Towel Rings, Bars, and Shelves
Misc Accessories
Medicine Cabinets
Mirrors
LED Backlit
Frameless
Channel Frame
Angle Frame
Mirror/Shelf Combo
Fixed / Adjustable Tilt
Seat Cover Dispensers
Security Accessories
Shower Accessories
Shower Curtains, Rods, and Hooks
Shower Seats
Soap Dispensers
Hand Sanitizer Dispensers
Wall Mounted
Deck Mounted
Soap Dishes
Parts / Accessories
Tampon/Napkin Accessories
Disposals
Vendors
Toilet Tissue Dispensers
Single Roll
Multiple Roll
Jumbo Roll
Single Fold, Cabinet
Combination Unit
Parts / Accessories
Towels/Waste Accessories
Towel Dispensers
Towel/Waste Combination Units
Waste Receptacles
Parts / Accessories
Lockers
Metal Lockers
Plastic Lockers
Toggle navigation
Free Shipping
Available* >>
About Us
Contact Us
844.699.2779
Cart
0
Search
Start Saving
Toilet Partitions
Metal Partitions
Metal Privacy Screens
Metal Pilasters, Panels, and Doors
Metal In Corner Compartments
Metal Between Wall Compartments
Laminate Partitions
Laminate Privacy Screens
Laminate Pilasters, Panels, and Doors
Laminate In Corner Compartments
Laminate Between Wall Compartments
Solid Plastic Partitions
Solid Plastic Privacy Screens
Solid Plastic Pilaster, Panels, and Doors
Solid Plastic In Corner Compartments
Solid Plastic Between Wall Compartments
Stainless Steel Partitions
Stainless Steel Privacy Screens
Stainless Steel Pilasters, Panels, and Doors
Stainless Steel In Corner Compartments
Stainless Steel Between Wall Compartments
Phenolic Partitions
Phenolic Privacy Screens
Phenolic Pilasters, Panels, and Doors
Phenolic In Corner Compartments
Phenolic Between Wall Compartments
Washroom Accessories
Childcare Products
Baby Changing Stations
Parts / Accessories
Seating
Custodial Accessories
Grab Bars
Straight, 1-1/4" OD
Straight, 1-1/2" OD
Single Wall Configs
Two Wall Configurations
Wall to Floor
Swing Up/Away
Shower / Tub
Bariatric
Grab Bar Accessories
Hand Dryers
Hand Dryers
Parts / Accessories
Healthcare Accessories
Hooks
Hospitality Accessories
Soap Dishes
Towel Rings, Bars, and Shelves
Misc Accessories
Medicine Cabinets
Mirrors
LED Backlit
Frameless
Channel Frame
Angle Frame
Mirror/Shelf Combo
Fixed / Adjustable Tilt
Seat Cover Dispensers
Security Accessories
Shower Accessories
Shower Curtains, Rods, and Hooks
Shower Seats
Soap Dispensers
Hand Sanitizer Dispensers
Wall Mounted
Deck Mounted
Soap Dishes
Parts / Accessories
Tampon/Napkin Accessories
Disposals
Vendors
Toilet Tissue Dispensers
Single Roll
Multiple Roll
Jumbo Roll
Single Fold, Cabinet
Combination Unit
Parts / Accessories
Towels/Waste Accessories
Towel Dispensers
Towel/Waste Combination Units
Waste Receptacles
Parts / Accessories
Lockers
Metal Lockers
Plastic Lockers
Home
>
Grab Bars
>
Straight, 1-1/2" OD
>
Bobrick Fino Collection B-9806x36 36" Straight Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Large Quantity, Item Customization, or Government Project?
Request A Quote
or give us a call at
920-569-0895
List Price: $400.80
Our Price
:
$
253.58
Savings: $147.22
Manufacturer:
Bobrick
Country of Origin:
United Kingdom
Availability:
Usually Ships within 2-3 Business Days
Product Code:
B-9806X36
Qty:
Description
Technical Specs
Bobrick Fino Collection B-9806x36 36" Straight Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Construction
Grab Bar shall be stainless steel with satin finish. Grab bar shall have type-303, 14 gauge stainless steel tubing. Tubing is 1-1/2" outside diameter. Clearance between the grab bar and the wall shall be 1-1/2". Concealed mounting flanges shall be 5-16" thick, threaded solid stainless steel with satin finish, 2" diameter, equipped with three screw holes for attachment to wall. Flange covers shall be 1/8" thick, threaded solid stainless steel with satin finish, 2" diameter and shall conceal the mounting screws. Threaded solid support posts shall have 1/4" wall thickness, 1" outer diameter securing the flange covers. A metric M8 hex screw, with a curved washer shall connect the grab bar's tube with the flange. Grab bar shall comply with accessible design (including ADAAG in the USA) for structural strength.
*Grab bars are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. To avoid potential injury, the building owner or maintenance personnel should remove the grab bar from service if the grab bar is not adequately secured to wall.
Installation
Provide concealed anchor device or backing as specified or required in accordance with local building codes before wall is finished. Fasten mounting flanges to anchor device or backing. Put flange covers over each mounting flange to conceal mounting screws. Concealed anchor devices and mounting screws are not included with Bobrick grab bars and must be specified as an accessory.
Place flanges in desired mounting locations. Use flange as a template to mark location of mounting screws and drive mounting screws into the wall at marked locations. Install grab bar on the wall by placing the flange covers onto the flange followed by the support posts, placed onto the flange covers. Place M8 hex screw with curved washer through the tube's elongate screw holes into the flange and tighten the screw. Eventually snap the two end-covers onto each of the tube's end.
Note:
Recommend use of #10 sheet metal screws or wood screws to install flange
Mounting Kits:
Dry Wall Mounting Kit- Bobrick offers a mounting kit that allows the FINO-grab bars to be installed in dry walls without backing. Wall requires minimum 5/8" painted or tiled dry wall.
Mounting Kit No. 9806-20
Glass Mounting Kit- Bobrick offers a mounting kit for Glass-partitions (other material is possible as well) for securing the grab bar from the opposite side of the panel via a "through-fix." Panel thickness can range from 1/2" to 1-3/8". Mounting Kit No. 9806-21
"Back to Back" Mounting Kit- Bobrick offers a kit for the installation of two grab bars against each other, being on the opposite side of the panel. Panel thickness can range from 1/2" to 1-3/8". Mounting Kit No. 9806-22.
Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship under normal usage service for one (1) year from date of sale.
Additional Options
Custom Grab Bar configurations and sizes are available.
Call us at 920-569-0895 ext. 2 or email
[email protected]
for pricing and lead times.
Accessories
Bobrick Fino Collection B-9806x42 42" Straight Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Bobrick Fino Collection B-9806x36 36" Straight Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Bobrick Fino Collection B-9806x24 24" Straight Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Bobrick 9806-20 Fino Collection Dry Wall Installation Kit for Grab Bar B-9806
Our Price
:
$265.65
Our Price
:
$253.58
Our Price
:
$241.67
Our Price
:
$102.40
Bobrick Fino Collection B-9806x18 18" Straight Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Bobrick 9806-21 Fino Collection Through Fix Installation Kit for Toilet Partitions
Bobrick 9806-22 Fino Collection Back-to-Back Installation Kit
Our Price
:
$229.60
Our Price
:
$94.12
Our Price
:
$43.65
Related Items
Gamco 150CX36" Straight Concealed Mount Grab Bar 1-1/2" (38mm) OD - Satin Stainless
Bradley 8120- 36" Straight Concealed Mt Grab Bar 1-1/2" (38 mm) OD - Antimicrobial
Bradley 8120- 48" Straight Concealed Mount Grab Bar 1-1/2" (38 mm) OD - Satin SS
ASI 3801-30W 30" Snap Flange Grab Bar 1-1/2" (38mm) OD - White Powder Coated Finish
Our Price
:
$37.67
Our Price
:
$58.50
Our Price
:
$92.25
Our Price
:
$49.30
Gamco 150SX18" Straight Grab Bar 1-1/2" (38mm) OD with Snap Flange - Satin Stainless
Gamco 150CX42T" Straight Concealed Mount Grab Bar 1-1/2" (38mm) OD - Textured Grip
Bradley 8122- 36" Straight Concealed Mount Grab Bar 1-1/2" (38 mm) OD - Safety Grip
ASI 3801-36-41 36" Straight Concealed Mount Grab Bar 1-1/2" (38mm) OD - Matte Black Finish
Our Price
:
$24.27
Our Price
:
$46.64
Our Price
:
$51.00
Our Price
:
$41.60
Share your knowledge of this product.
Be the first to write a review »