Home > Childcare Products > Baby Changing Stations >

Bradley 962-000000 Recessed Horizontal Baby Changing Station, Satin Finish
Bradley 962-00 Baby Changing Station
Image of 962-11 Surface Mount Model
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $2,314.00
Our Price: $1,735.50
Savings: $578.50
Manufacturer: Bradley Corporation
Country of Origin: USA
Availability: Usually Ships within 2-3 Weeks



Product Code: 962-000000
Qty:

Description Technical Specs
 
Bradley 962-000000 Recessed ADA Compliant Stainless Steel Horizontal Baby Changing Station, Satin Finish
Construction
Bradley baby changing station is fabricated of bacterial resistant polyethylene with brushed 20 gauge stainless steel exterior. Equipped with a pneumatic gas shock mechanism to ensure smooth, safe open and close motions. Rated to support static load of 250 lbs, tested to 390 lbs. Molded dual liner dispenser holds approximately 50 liners - P11-021 bed liners (not included).

Installation
RWO: 35-5/8" W x 19-5/8" H x 3-7/8" D

Recommended Blocking:
Wood double stud blocking is necessary. Contact an architect and building official to make sure the blocking is adequate and complies with building codes.

For A.D.A. compliance, top of lower double stud should be 30 in. (762 mm) from the floor.

1. Slide changer into blocking area and mark mounting hole location on blocking studs. HINT: This may require 2 additional people to help hold changer in position while you are marking the locations.

2. Use a power drill with a 3/16 in. bit and drill six (6) pilot holes in the blocking studs.

3. Shim changer for a snug fit.

4. Align holes in changer with drilled holes and secure using the wood screws. Wood screws have been provided and are for wood only. NOTE: It is installers responsibility to provide correct fasteners for other substrates.

5. Ensure all six (6) screws are tight.

Operation
Rotate base downward. Place infant on top of the changing surface. Use restraint system. After child has been changed, remove restraint system and rotate base back up against the wall.
Warning: CA Residents

This product can expose you to chemicals including Nickel (Metallic), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Accessories
Bradley P15-491 Strap Kit for 962 and 963 Series Baby Changing Stations
Our Price: $35.80
Bradley P15-491 Strap Kit for 962 and 963 Series Baby Changing Stations

Share your knowledge of this product. Be the first to write a review »