Channel Frame Mirror with shelf frame is fabricated of type 430 stainless steel, one piece frame with 90 degree mitered corners. Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the wall. Locking devices secure mirror to concealed wall hanger.
The exposed frame surfaces have a bright polish finish.
Mirror standard glazing is No. 1 quality, 1/4" (6.4mm) thick float glass, selected for silvering, electrolytically copper-plated by the galvanic process. It is warranted against silver spoilage for 15 years. The back is protected by full size, shock absorbing, water resistant, nonabrasive, polyethylene padding.
Shelf is fabricated of 18-8, type 304, 18 gauge stainless steel with satin finish. When properly installed, mirror shelf meets accessible design by protruding 4"(102mm) from wall.
Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide
backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed
backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide
fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.
Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this, mirror
must be centered in front of the wall hanger horizontally, pressed flat against the wall approximately 1" (25mm) above final
position and then lowered into final position.
Place shelf below mirror and install with wall screws (not furnished) at points indicated by S.
Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final
position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror
near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.
"2S" Tab Design — Double-sided tape secures mirror to concealed wall hanger when it is lowered into final position.
Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale.