Home > Mirrors > Channel Frame >

Bobrick B-1658 1830, 18" x 30" Channel Framed Mirror with Tempered Glass
Bobrick B-1658 18 x 30 Mirror image
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $198.90
Our Price: $114.37
Savings: $84.53
Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days

Product Code: B-1658 1830

Description Technical Specs A Note from the Manufacturer
Bobrick B-1658 1830, 18" W x 30" H (44 x 75cm) Channel-Framed Mirror with Tempered Glass and Theft Resistant Mtg
Tempered Glass Mirror has frame fabricated of type 430 stainless steel, one piece frame with 90 degree mitered corners. Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the wall.

Mirror standard glazing is No. 1 quality, 1/4" (6.4mm) thick tempered select float glass, selected for silvering and laminated with 0.015" thick clear vinyl in the center, and electrolytically copper-plated by the galvanic process. It is warranted against silver spoilage for 15 years. The back is protected by full size, shock absorbing, water resistant, nonabrasive, polyethylene padding.

The exposed frame surfaces have a bright polish finish.

Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure wall hanger with screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.

Snap Locking Design: Hang mirror on wall hanger. Lock mirror to wall hanger by tightening Phillips-head locking screws that are concealed in bottom of frame at points indicated by a T.

"2S" Tab Design: Comprises of two brackets, while the bottom one is furnished with double side tape. Bottom hanger bracket's mounting holes must be 1" - 1 1/2" above mirror's bottom edge. Note: Bottom hanger bracket is not supposed to engage with louvers of mirror's backplate. Hang mirror on wall top hanger bracket with the top two louvers engaged behind top wall hanger bracket. To do this, mirror must be centered in front of the wall hanger horizontally, pressed only at the top against the wall approx. 1" (25mm) above final position an then lowered into final position. When lowering, pull mirror's bottom edge off the wall by preventing bottom bracket from engaging. Once lowered, mirror must be pressed against wall to engage with double sided tape of lower wall hangar bracket.

Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.

"2S" Tab Design — Double-sided tape secures mirror to concealed wall hanger by pressing mirror against double sided tape of lower hanger once it is lowered into final position.

For compliance with ADA Accessibility Guidelines install unit with bottom edge of reflecting surface no higher than 40" (1016mm) maximum above finished floor. Note: Consult local and national accessibility codes for proper installation guides. Code compliance is the responsibility of the installer.

Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale.

Share your knowledge of this product. Be the first to write a review »