ASI 5002 Liquid Soap Dispenser - Division 10 Direct

Home > Soap Dispensers > Wall Mounted >

ASI 5002 Recessed Disposable Cartridge Liquid Soap Dispenser, Stainless Steel

List Price: $327.60

Our Price: $180.20

Savings: $147.40

Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days

Product Code: 5002

Qty:

Description

Technical Specs

A Note from the Manufacturer

ASI 5002 Recessed Disposable Cartridge Liquid Soap Dispenser, Stainless Steel

Construction
Recessed disposable cartridge soap dispenser is fabricated of 18 gauge stainless steel, alloy 18-8, type 304. Exposed surfaces have a satin stainless steel finish. 1" face trim is formed from one piece with no visible seams with a 1/2" square return to the wall. Dispenser lever is Zamak alloy casting. Door is attached at the side with a full length stainless steel piano hinge and is held closed with tumbler lock keyed like other ASI washroom equipment. Valve is fabricated of heavy duty vinyl and is permanently attached to a disposable soap cartridge. Capacity: 800 ml cartridge.

Installation

Rough Wall Opening (RWO) required is 5-3/4" W x 13-1/2" H x 4-1/4" D (146mm x 343mm x 108mm)

Unit is mounted in wall recess using No 10 self tapping screws (by others) through concealed mounting holes provided.

For compliance with ADA Accessibility Guidelines, unit should be installed so that dispenser lever is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access is provided or 46′′ (1168mm) max. AFF if side reach over an obstruction is only provided (i.e. vanity). For general utility install unit so that lever is 46′′ (1168mm) AFF or 15′′ (382mm) above wash basin.

Operation
Soap is manually dispensed by pulling the lever forward.

Procedure for Loading Bag-in-a-Box into typical unit:

1. Load box into unit with nozzle tube facing forward.
2. Pull tube/nozzle all the way out of box after removing cardboard access closure.
3. Orient nozzle to cradle if necessary by twisting tube near bag outlet union.
4. Seat nozzle into cradle and tube into retainer posts, making sure it stays centered.
5. Close door and lock with key.
6. Check to ensure that nozzle tip remained in cradle.
7. Test operate the unit to ensure proper performance.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.