Home > Childcare Products > Baby Changing Stations >

ASI 9013-9 Surface Mount Horizontal Baby Changing Station, Satin Finish
ASI 9013-9 Baby Changing Station with Satin Stainless Steel Finish image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $3,721.10
Our Price: $2,046.70
Savings: $1,674.40
Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days


Product Code: 9013-9
Qty:

Description Technical Specs
 
ASI 9013-9 Surface Mount Horizontal Baby Changing Station, Satin Finish
Construction
Surface Mounted Stainless Steel Baby Changing Station door, flange and cabinet shall be type 304 stainless steel, all welded construction. All exposed surfaces shall be polished to a satin finish. The door shall be 16 gauge and the flange and cabinet shall be 18 gauge. The changing table shall be equipped with a rounded contoured pull handle and shall have a concealed damped gas spring to assist user in opening and closing unit with one hand. The bed liner shall be light gray, high impact plastic with a smooth finish for easy cleaning. The liner shall be shaped to cradle a child’s body and shall be equipped with an adjustable two-part child protection safety strap and cam buckle adjustable with one hand. Unit shall include two bag hooks, bed liner dispenser, and a C-fold towel and multi-fold towel dispenser which can easily be converted to a multi-fold towel dispenser that needs no adapters. Unit shall have a minimum holding capacity of 400 lbs (181,4 kg). The strength of the supporting wall and hardware must be adequate to support the rated load. Unit shall provide graphic and instructions in 4 languages. Unit shall comply with ASTM F-2285, G-21, G-22 and ANSI Z535.

Installation
Mount unit to wood studs using four (4) 3/8" x 2" [Ø10 x 51] lag screws provided (or other fasteners appropriate for wall conditions, not supplied) through mounting holes in rear wall of cabinet. Recommended anchor for hollow metal or wood stud walls where studs do not line up with mounting holes is a TOGGLER® model BCS toggle bolt (provided) used with 3/8"-16 screws (provided). For masonry walls use appropriate anchors (not provided). Use washers and snap covers provided. For compliance with 2010 ADA Accessibility Standards install unit so that top edge of changing table is 32" to 32-3/8" [813 to 822] above finished floor (AFF). See installation instructions packed with unit.

Operation
Pull down changing table is counterbalanced with a damped gas spring and can be opened or closed with one hand. Unit is operable with less than 5 lbsf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Secure the child in place by using child protection safety strap. The safety strap and cam buckle are assembled by sliding the safety strap into the cam buckle until it is snug on child. Tighten or loosen the strap by pulling the strap end through and clamping the buckle. To unbuckle the strap simply lift the buckle lever.

Warranty
Unit shall be warranted against defects in materials or workmanship for five (5) years per the manufacturer, American Specialties, Inc.

Accessories
ASI 9013 Recessed Stainless Steel Baby Changing Station, Horizontal ASI 9013-9 Surface Mount Horizontal Baby Changing Station, Satin Finish
Our Price: $1,749.30
Our Price: $2,046.70
ASI 9013 Recessed Horizontal Baby Changing Station in Satin Stainless Steel Finish image ASI 9013-9 Baby Changing Station with Satin Stainless Steel Finish image

Share your knowledge of this product. Be the first to write a review »