Home > Grab Bars > Swing Up/Away >

Bobrick B-49916 Antibacterial Vinyl Coated Swing Up Grab Bar 1-1/4" OD, White
Bobrick B-49916 Swing-Up Grab Bar image
 
Alternative Views:


Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $843.30
Our Price: $484.90
Savings: $358.40
Manufacturer: Bobrick
Country of Origin: Italy
Availability: Usually Ships within 2-3 Business Days



Product Code: B-49916
Qty:

Description Technical Specs A Note from the Manufacturer
 
Bobrick B-49916 White Antibacterial Vinyl Coated Swing Up Grab Bar 1-1/4" OD includes 3/16" thick  Stainless Steel Backplate with screw holes for attachment to wall.  Swing Up Grab Bar can be manually raised and lowered to horizontal position for support. When raised to the upright position, it will remain vertical until lowered.
Construction
Swing Up Grab Bar is zinc plated 3/4" diameter steel tube with 1/8" thick white vinyl antibacterial, biocompatible, and warm to the touch coating with glossy finish. The outside diameter is 1-5/16". The backplate is 3/16" thick type 304 stainless steel, equipped with screw holes for attachment to wall.

Swing Up Grab Bar withstands loads of 330 pounds when properly installed complying with accessible design (including ADAAG in the U.S.A.) for structural strength.

*Grab bars are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended.

Installation
Remove black plastic Wall Plate from rear of Grab Bar Backplate. Provide Concealed Anchor Device or backing as specified or required in accordance with local building codes before wall is finished. Once desired mounting location is determined, black plastic Wall Plate may be used as a template to mark locations of mounting screws on finished wall, as necessary.

Mount Wall Plate on finished wall. Lower two mounting screw locations to be drilled to accept two 2-1/2" (65mm) long #10 Phillips sheet metal screws (furnished). Upper four mounting bolt locations to be drilled to accept four 3" (75mm) long 5/16" hex-head lag bolts (furnished). Secure Wall Plate to wall at lower two mounting screw locations with Phillips sheet metal screws.

Mount Folding Grab Bar to Wall Plate and concealed anchor device or backing (not furnished). Pull white plastic Backplate Cover away from metal Grab Bar Backplate. Securely mount Grab Bar to Wall Plate/wall at upper four mounting bolt locations of Wall Plate with hex-head Lag Bolts, through Backplate and Wall Plate into wall.

Fold Grab Bar up into the vertical position. Locking nuts at the sides of the pivot assembly are to be adjusted to ensure that Grab Bar remains in vertical position after it is rotated up. Snap Backplate Cover into place over Grab Bar Backplate and Wall Plate.

Optional anchor devices and/or fasteners (not provided) may be used, subject to type of wall on which the grab bar will be mounted, but would also be subject to local building codes for safe grab bar mounting.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship under normal usage service for one (1) year from date of sale.

Additional Options
Custom Grab Bar configurations and sizes are available.

Call us at 920-569-0895 ext. 2 or email [email protected] for pricing and lead times.

Share your knowledge of this product. Be the first to write a review »