Home > Hand Dryers > Hand Dryers >

Bobrick B-710 CompacDryer™ Surface Mtd Automatic Hand Dryer, Grey Plastic, International
Bobrick B-710 Hand Dryer image
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $601.80
Our Price: $346.04
Savings: $255.76
Manufacturer: Bobrick
Country of Origin: China
Availability: Usually Ships within 2-3 Business Days

Product Code: B-710

230V (European Compliance)

Description Technical Specs A Note from the Manufacturer
Bobrick B-710 CompacDryerâ„¢ Surface Mounted Automatic Hand Dryer, Grey Plastic Molded Cover
Automatic hand dryer has one piece 3/32" thick fire retardant, high quality, high impact, pale grey ABS plastic cover. The cover secures to the mounting base with three (3) flat head stainless steel screws. The mounting base is 5-64" thick fire retardant molded grey plastic with a high gloss finish. The air inlet grille fits into the bottom of the mounting base and is secured between the fan housing and mounting base. The brushless, external rotor motor is 115V AC, 90 W, 60 Hz, 2500 rpm and comes equipped with an automatic thermal overload switch. The centrifugal fan is dynamically balanced 5-15/64" diameter. It directs air flow from the coiled nickel chrome heating element to provide uniform temperature. Heating element is inaccessible to vandals.

Wall Preparation: Secure mounting base on wall using template provided. For masonry walls, provide four #10 expansion shields or anchors and secure with four #10 (M4.8) sheet-metal screws (not furnished). For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with four #10 (M4.8) round-head sheet-metal screws or 3/16" (5mm) toggle bolts (not furnished). Provide electrical service from nearest distribution panel to dryer mounting base in compliance with local electrical codes.

Wiring Instructions:
Connect ground wire to ground terminal marked , the black or hot wire to terminal marked L1, and neutral or white wire to terminal marked N. A DEDICATED LINE IS REQUIRED FOR EACH 115-VOLT INSTALLATION.

Notes: Electronic sensor in CompacDryer will pick up movement within 4" (100mm) of air-outlet nozzle. Use caution when choosing location for CompacDryer in confi ned areas. Consider proximity to doorways and other traffic areas.

Bobrick automatic hand dryers should be installed at least 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor.

User activates dryer by placing hands under sensor. Dryer automatically shuts off after time-out when user removes hands from sensor activation zone.

1-Year Limited Warranty — This warranty is limited to the repair or exchange of defective parts at the option of Bobrick.

Share your knowledge of this product. Be the first to write a review »